Software Diagnostics Output
C-60
LEVEL = 2
Disabled blocks for type- %%1
Block-0:%%2
Block-1:%%2
1. The block type (block id). For the FLASHDB device (application flash), there can be up to 50
blocks . For FLSEXT1 (logging flash), the user can define up to five blocks (0-4).
2. The status of the blocks in the application or logging flash can be one of: 0 (block enabled) or 1
(block disabled).
## 601 LEVEL = 1, 20 , 21 , ... , 39
Pointer to version : %% 1
Pointer to data : %% 2
Length of data : %% 3
1. Pointer to block’s header.
2. Pointer to block’s data.
3. Length of block’s data.
Supported only by versions < 3.70. Previous versions support 20 types of blocks.
In order to receive diagnostics on block number 0 , use LEVEL = 20.
In order to receive diagnostics on block number 5 , use LEVEL = 25.
From versions V3.70 on, at LEVEL = 1 the system displays a table that includes all of this data for
all block IDs.