Motorola AP 73 Transmitting During Band Scanning, Pressing Push-To-Talk PTT Button 6, a digit on

Scan Operations

NOTE

Pressing Push-To-Talk (PTT) Button (6), a digit on

the numeric keypad, or also ends the scanning.

NOTE

The ‘SCAN’ indicator turns off when scanning is terminated and the radio displays the frequency where scanning stopped.

IMPORTANT

If both memory channels are left blank (unpro- grammed), the radio scans the entire frequency band. If channel 19 is programmed but channel 20 is blank, the upper frequency limit becomes the highest frequency in the band. If channel 20 is pro- grammed but channel 19 is blank, the lower fre- quency limit becomes the lowest frequency in the band. If the frequency stored in channel 19 is lower than that stored in channel 20, then scan proceeds in an incrementing order otherwise, scan proceeds in a decrementing order.

Transmitting During Band Scanning

When the scan is locked at a frequency:

• Press Push-To-Talk (PTT) Button (6).

IMPORTANT

As soon as Push-To-Talk (PTT) Button (6) is pressed, the radio exits band scanning and trans- mits the TX frequency which corresponds to the active RX frequency, plus or minus any selected TX offset. If the user-defined mode is selected (‘+’ and ‘–’ indicators both on), the radio transmits the user- defined TX frequency.

36 2-Year Warranty