Memory Mode Operations
32
2-Year Warranty
Programming A Memory Channel
There are 20 memory channels available. Each mem-
ory channel consists of a receive / transmit frequency
pair, the type of TX offset and the offset frequency.
NOTE
Channels 19 and 20 are normally used to store the
frequency limits for Programmable Band Scan
operation (see
“Programmable Band Scan”
on
page34).
In MHz mode:
➊
Select the desired frequency, type of TX offset and
offset frequency (see“MHz Mode Operations” on
page 25).
➋
Press and hold the Toggle Light / Enter and
Parameter Transfer Button (4) until theLCD
Screen (18) shows xxx (where xxx is the last
channel selected in Memory mode). The The
The channel number flashes if it is unprogrammed,
and lights continuously if it is programmed.
➌
Use the Selector Knob (2) to select the desired
channel number.
➍
Press the Toggle Light / Enter and Parameter
Transfer Button (4) again to program the selected
memory channel.