32
Placing a Call
To place a call:
1. Power the phone on by pressing and holding
P until the display appears and you hear
an audible alert.
2. Enter the number you want to call.
•Press c to erase one digit at a time if
you make a mistake.
•Press and hold c to clear the entire
entry.
You can also recall a previously dialed or
stored number. (See “Using Phone Memory”
on page 36 for details on storing or recalling.)
3. Press and hold = until you hear two tones.
You see Dialing
XXX
, where
XXX
is the
number you are calling.
or
Press S to place the call. You hear a single-
tone alert (if the keypad tones are turned on)
and see Dialing
XXX
, where
XXX
is the
number you are calling.
You can dial phone numbers with up to 32 digits,
but only the last 20 digits appear in the display.
Press r to see the entire phone number.