![](/images/new-backgrounds/1236632/23663271x1.webp)
13. Using additional handsets
You can use up to five D1111 additional handsets with your D1111 base to extend your phone system without needing to install extension sockets for each new phone.
Your D1111 handset can also be registered to up to 3 other bases. You can then select the base you would prefer to use.
If you have purchased a D1111 multiple pack any additional handsets come
If you have purchased an additional handset separately you must register it to your D1111 base before it can be used.
Registering an additional handset
At the base:
1.Press and hold pfor 2 seconds until the base Power starts flashing. The base will remain in registration mode for 90 seconds.
At the handset:
1.If the handset is new and the display shows Please Register. Press Menu.
Scroll uto Registration. Press Select.
Or
If the handset has already been registered to another base the standby display is shown. Press Menu, scroll uor dto Registration and press Select.
2.Register Handset is highlighted. Press Select.
3.Bases are displayed. If necessary, scroll uor dto a new base you wish to register your D1111 handset to and press Select.
4.Enter the system PIN and press OK. (Default setting = 0000)
5.The display shows Searching Base X (where X is the chosen base
number) then Handset Registered.
The handset is automatically assigned the next available handset
number.
If registration is not successful first time, please repeat the process again in case the base registration period ran out of time.
If there are already 5 handsets registered to the base, the registration will fail. You must
Select a base
If your D1111 handset is registered to more than one base, you can select which base to use.
1.Press Menu, scroll uor dto Registration and press Select.
2.Scroll dto Select Base and press Select.
3.All base numbers are displayed. (In use) is added to bases where the handset was previously registered to. Scroll uor dto the base you want and press Select.
4.Display shows Searching Base…. then the standby display for that base.
De-register a handset
Use one handset to
1.Press Menu, scroll uor dto Registration and press Select.
2.Scroll dto
3.Enter the system PIN and press OK. (Default setting = 0000)
4.Scroll uor dto the handset you want to
5.Press Yes to confirm or No to cancel.
6.Press Back to return to the previous menu level or >to return to standby.
36 | Using additional handsets |
|
|