Motorola D1110 manual Wall mounting, Recall

Press and hold uto insert a pause (P) before entering the telephone number.

You may also need to enter a pause when storing international numbers or charge card numbers.

Recall

You may need to use the recall function if you are connected to a switchboard/PABX (Private Automatic Branch Exchange), contact your PABX supplier for further information.

17. Wall mounting

IMPORTANT

Before you wall-mount your D1111, check that you are not drilling into any hidden wiring or pipes.

Before you drill, make sure the power and telephone line cables will reach the sockets.

1.Use the following templates to mark the drilling locations.

•To wall-mount the base, drill two holes in the wall 4.5cm apart horizontally using an 8mm drill bit.

•To wall-mount the charger, drill two holes in the wall 3.2cm apart horizontally using an 8mm drill bit.

Wall mounting 41