Motorola D512, D513 Base settings, Base ringer volume, Base ringer melody, Change base PIN code

6. Base settings

6.1Base ringer volume

Choose from 5 volume levels or Off.

1.Press m, scroll dto SETUP and press m. The display shows BASE VOLUME.

2.Press m.

3.Press uor dto select the volume (1 - 5 or OFF).

4.Press mto confirm or nto return to the previous menu.

6.2Base ringer melody

Choose from 5 different base ringer melodies.

You will hear a sample ring as you scroll to each ringer melody.

1.Press m, scroll dto SETUP and press m.

2.Scroll dto BASE MELODY and press m.

3.Press uor dto select the ringer melody (1 - 5).

4.Press mto confirm or nto return to the previous menu.

6.3Change base PIN code

Some functions are protected by a 4 digit PIN code which must be entered if you want to change the settings. The default PIN is 0000. You can change this to your own preferred number.

When you enter a PIN, the digits are shown as ****.

1.Press m, scroll dto SETUP and press m.

2.Scroll dto PIN CODE and press m.

3.Enter the 4 digit PIN code (default = 0000) and press m.

4.Re-enter the new PIN again and press mto confirm.

5.The display shows RETYPE. Re-enter the new PIN again and press mto confirm.

IMPORTANT

If you change the PIN code, please keep a record of the new number.

6.4Dial mode

Your D5 is set to tone dialling. You should only need to change this if connected to an older type of switchboard/PBX which requires Pulse dialling.

1.Press m, scroll dto SETUP and press m.

2.Scroll dto DIAL MODE and press m.

22 Base settings