Motorola D512, D513, D511 manual Installing and charging the handset

2.Plug the power adaptor with clear connecter into the

socket marked on the underside of the base and plug the other end into the mains power wall socket. Switch on the mains power.

Installing and charging the handset

1.Remove the battery cover from the back of the handset and insert the 2 x rechargeable Ni-MH battery cells supplied. Please note the ’+’ and ’-’ markings inside the battery compartment and insert in the correct direction.

2.Slide the battery cover back into place.

3.If you are charging the batteries for the first time, place the handset on the base to charge for at least 24 hours continuously.

4.When the handset is fully charged, icon will appear steady on the display. Plug the other end of the telephone line cord (make sure that one end is already plugged into the base) into the telephone wall socket.

Connecting the handset and charger (for multi-pack only)

If you have purchased a multiple pack, you will need to carry out this process for all the handsets and chargers.

1.Plug the power adaptor with red connecter into the

socket marked on the underside of the charger and plug the other end into the mains power wall socket.

2.Remove the battery cover from the back of the handset and insert the 2 x AAA NiMH rechargeable batteries supplied. Please note the ’+’ and ’-’ markings inside the battery compartment and insert in the correct direction.

3.Slide the battery cover back into place.

4.If you are charging the batteries for the first time, place the handset on the charger to charge for at least 24 hours continuously.

5.When the handset is fully charged, icon will appear steady on the display.

The display will show the time and handset number (e.g. 2) to indicate that it is registered to the base.

IMPORTANT

Warning! Use only rechargeable Ni-MH battery cells (2 x

AAANi-MH 550mA rechargeable batteries) supplied with your D5.

Getting started 7