Motorola DCT2000 manual

Connect a video cable between the VIDEO connector on the DCT2000 and the CABLE / TV VIDEO connector on the A / V receiver.

Connect a SPDIF cable between the SPDIF connector on the DCT2000 and the DIGITAL INPUT COAX connector on the A / V receiver.

Connect an RF cable between the cable wall outlet and the cable in connector on the DCT2000.

Connect the RF coaxial cable, supplied with the DCT2000, between the RF IN and TO RF IN connectors on the DCT2000.

Connecting Baseband with Dolby® Digital to a TV, VCR and A / V Receiver

1

2

3 Connect a stereo audio cable between the AUDIO OUT R and L connectors on the DCT2000 and the CABLE / TV AUDIO R and L connectors on the A / V receiver.

4

5 Connect a stereo audio cable between the VCR AUDIO OUT R and L connectors on the A / V receiver and the INPUT AUDIO R and L connectors on the stereo VCR.

6

7 Connect a stereo audio cable between the OUTPUT AUDIO R and L connectors on the stereo VCR and the AUDIO VCR IN R and L connectors on the A / V receiver.

8

9

10

Connect a video cable between the INPUT VIDEO connector on the stereo VCR and the VIDEO VCR OUT connector on the A / V receiver.

Connect a video cable between the OUTPUT VIDEO connector on the stereo VCR and the VIDEO VCR IN connector on the A / V receiver.

Connect a video cable between the INPUT VIDEO connector on the stereo TV and the TV / MONITOR OUTPUT VIDEO connector on the A / V receiver.

Cable connections marked with an * are optional. These connections allow the use of the DCT2000 and TV without powering-on the VCR and A/V Receiver. The optional connections are:

•Connect a RF coaxial cable between the TO TV / VCR connector on the DCT2000 and the CABLE / ANTENNA IN connector on the stereo VCR.

•Connect a RF coaxial cable between the To TV connector on the stereo VCR and the CABLE / ANTENNA IN connector on the stereo TV.

With this configuration, you can record with the VCR and playback sound through the Dolby® digital receiver.

You must connect the left / right baseband audio and SPDIF connections from the DCT2000 to the A / V receiver when using the Dolby® Digital SPDIF output.

2 7