Problem | Possible Solution | |
|
| |
There is no audio | Verify that the MUTE button on the DCT* or the remote | |
when viewing cable | control has not been pressed. Press MUTE on the remote | |
channels | control to restore sound. | |
| If the DCT* audio output is connected to the TV, verify | |
| that the MUTE button on the TV has not been pressed. | |
| If the DCT* audio output is connected to a home theater | |
| receiver, verify that the receiver is set to the appropriate | |
| input source and the mute button on the receiver has not | |
| been pressed. | |
| Verify that you have the correct cables for the audio | |
| ports. | |
| Verify that the audio cables are firmly connected | |
| between the DCT* and the audio playback device (TV, | |
| receiver, etc.). | |
|
| |
There is no audio | Not all Dolby Digital programs feature full 5.1 surround | |
from the center | sound. In some cases, the programs may only contain | |
and/or surround | left and right stereo audio. | |
speakers of a home | Verify that the SPDIF cable (coaxial or optical) is firmly | |
theater receiver | ||
connected to the DCT* and the home theater receiver. | ||
connected to the | ||
| ||
DCT* | Verify that the home theater receiver is set to a surround | |
| sound audio mode (Dolby Digital, Dolby Pro Logic II, | |
| Dolby Pro Logic). | |
| Verify that the receiver is properly configured to work | |
| with all connected speakers. | |
|
|
36
