Motorola DCT5100/DCT6200/DCT6208, Hdtv, Connector cables to be used 6 ft coaxial cable

Connecting the DCT6200/DCT6208 to a High-Definition TV – Video Only

TO

TV/VCR

CABLE

IN

IR

USB

DCT5100/DCT6200/DCT6208

AUDIO IN				VIDEO
R	L	SPDIF	IN	OUT
				S-VIDEO	IEEE 1394	SWITCHED
				TV		105/125V
						60Hz
R	L	Y	Pb	Pr Pass Card
						4A MAX	CONVENIENCE
AUDIO				OPTICAL		500W MAX
							OUTLET
OUT				SPDIF

HDTV

DVI IN	R		Video 1	Video 2	Video 3
	L	S-Video			Y
					Pb
		Video			Pr
Cable/			R	R	R
Antenna IN		Audio
			L	L	L

Do not plug the DCT6200/DCT6208 power cord into a wall outlet until you have completed all connections between the DCT and other components.

This diagram shows the High-Definition video connection between your Motorola DCT6200/DCT6208 and your High-Definition television (HDTV). This is the primary diagram for providing HD video and should be done prior to the following audio configurations.

Connector cables to be used:

•6 ft coaxial cable

•Three-pronged component video cable

1.Using a coaxial cable, connect cable wall outlet to the CABLE IN coaxial input on the cable box.

2.Locate the Y Pb Pr inputs on your HDTV and the Y Pb Pr outputs on the cable box. To make identification easy, these connecters are color-coded on the cable box (Y = green, Pb = blue, and Pr = red). Colors may vary on your HDTV.

3.Using a three-jack component video connector, connect the Y output on the cable box to the Y input on your HDTV. Do the same for the Pb and Pr connections.