Motorola important safety instructions Hdtv, DCT5100/DCT6200/DCT6208

Connecting the DCT6200/DCT6208 to a High-Definition TV and VCR

	AUDIO IN
	R	L
TO	IR
TV/VCR	R	L
CABLE
	USB	AUDIO
IN		OUT

				VCR
Cable/	Audio IN		Video IN	S-Video IN
Antenna IN	R	L
			Video OUT	S-Video OUT
Cable/	Audio OUT
Antenna OUT
	R	L

				HDTV
DVI IN	R	Video 1	Video 2	Video 3
	L	S-Video		Y
				Pb
		Video		Pr
	Cable/	R	R	R
	Antenna IN	Audio	L	L
		L

DCT5100/DCT6200/DCT6208

		VIDEO
SPDIF	IN	OUT
		S-VIDEO	IEEE 1394	SWITCHED
		TV		105/125V
				60Hz
Y	Pb	Pr Pass Card
				4A MAX	CONVENIENCE
		OPTICAL		500W MAX
					OUTLET
		SPDIF

Do not plug the DCT6200/DCT6208 power cord into a wall outlet until you have completed all connections between the DCT and other components.

This diagram should be used if you intend to use a standard stereo VCR in your configuration. This configuration will allow you to watch both HD and Standard Definition video on your HDTV as well as record and play Standard Definition video via your VCR.

1.Using the Video Only diagram, connect your coaxial cable to the Motorola cable box and the cable box Y Pb Pr HD video connection directly to your HDTV.

Connector Cables to be used (not all cables included):

• 1 set of two-pronged RCA type audio cables (red & white) • 2 sets of “Y” audio splitter cables

• 2 S-video cables – OR – 2 sets of single-pronged RCA type video cables (yellow)

Note: The video cables you use will depend on the inputs/outputs on your VCR and HDTV. S-video is considered the higher standard definition video output and should be your first choice.

2.Connect the single connector end of a Y audio splitter cable to the AUDIO OUT R (red) on the cable box. Insert the other ends into the AUDIO IN R on your VCR and AUDIO IN R on your HDTV.

3.Use the second splitter cable to connect the AUDIO OUT L (white) on the cable box to the AUDIO IN L connections on both the VCR and the HDTV.

4.Use the two-pronged RCA cable to connect the AUDIO OUT L & R on your VCR to the AUDIO IN L & R on your HDTV.

5.Using an S-video cable, connect the S-VIDEO output on the cable box to the S-VIDEO IN on your VCR. Then use the second S-video cable to connect the S-VIDEO output on the VCR to the S-VIDEO IN on your HDTV.

– OR –

6.Using your single-pronged RCA type video connector cable, connect the VIDEO OUT (yellow) connector on the cable box to the

VIDEO IN connector on your VCR. Next, use the second single-pronged RCA type video connector cable to connect the VIDEO OUT connector on your VCR to the VIDEO IN connector on your HDTV.