Motorola DS6707 Decode UPC/EAN/JAN Supplementals Parameter # 10h

Decode UPC/EAN/JAN SupplementalsParameter # 10h

Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN

13+2). The following options are available:

• If you select Ignore UPC/EAN with Supplementals, and the scanner is presented with a UPC/EAN

plus supplemental symbol, the scanner decodes UPC/EAN and ignores the supplemental characters.

• If you select Decode UPC/EAN with Supplementals, the scanner only decodes UPC/EAN symbols with

supplemental characters, and ignores symbols without supplementals.

• If you select Autodiscriminate UPC/EAN Supplementals, the scanner decodes UPC/EAN symbols with

supplemental characters immediately. If the symbol does not have a supplemental, the scanner must

decode the bar code the number of times set via UPC/EAN/JAN Supplemental Redundancy on page 10-14

before transmitting its data to confirm that there is no supplemental.

• If you select one of the following Supplemental Mode options, the scanner immediately transmits EAN-13

bar codes starting with that prefix that have supplemental characters. If the symbol does not have a

supplemental, the scanner must decode the bar code the number of times set via UPC/EAN/JAN

Supplemental Redundancy on page 10-14 before transmitting its data to confirm that there is no

supplemental. The scanner transmits UPC/EAN bar codes that do not have that prefix immediately.

• Enable 378/379 Supplemental Mode

• Enable 978/979 Supplemental Mode

• Enable 977 Supplemental Mode

• Enable 414/419/434/439 Supplemental Mode

• Enable 491 Supplemental Mode

•Enable Smart Supplemental Mode - applies to EAN-13 bar codes starting with any prefix listed

previously.

•Supplemental User-Programmable Type 1 - applies to EAN-13 bar codes starting with a 3-digit

user-defined prefix. Set this 3-digit prefix using User-Programmable Supplementals on page 10-13.

•Supplemental User-Programmable Type 1 and 2 - applies to EAN-13 bar codes starting with either of

two 3-digit user-defined prefixes. Set the 3-digit prefixes using User-Programmable Supplementals on

page 10-13.

•Smart Supplemental Plus User-Programmable 1 - applies to EAN-13 bar codes starting with any

prefix listed previously or the user-defined prefix set using User-Programmable Supplementals on page

10-13.

•Smart Supplemental Plus User-Programmable 1 and 2 - applies to EAN-13 bar codes starting with

any prefix listed previously or one of the two user-defined prefixes set using User-Programmable

Supplementals on page 10-13.

NOTE If you select 978/979 Supplemental Mode and are scanning Bookland EAN bar codes, see

Enable/Disable Bookland EAN on page 10-9 to enable Bookland EAN, and select a format using

Bookland ISBN Format on page 10-21.

NOTE To minimize the risk of invalid data transmission, select either to decode or ignore supplemental

characters.