Motorola DS6707 Advanced Data Formatting 11 - 31

Advanced Data Formatting 11 - 31
Move Cursor
Scan a bar code below to move the cursor in relation to a specified character. Then enter a character by scanning
a bar code from the Alphanumeric Keyboard on page 11-91.
Move Cursor to Last
Occurrence of String and
Replace All
This action replaces all occurrences of a selected string with another
user-defined string, and moves the cursor to the beginning of the last
occurrence. Scan
Move Cursor to Last Occurrence of String and
Replace All
, then enter an alphanumeric string representing the
character(s) (up to 10) to match and delete using the
Alphanumeric
Keyboard
. Scan the End of Message bar code on page 11-100 . Enter
another alphanumeric string representing the character(s) (up to 10) to
insert using the
Alphanumeric Keyboard . Scan End of Message .
11-32
Skip to End Scan Skip to End to move cursor to the end of the data. 11-32
Skip Ahead “N” Characters Scan one of these bar codes to select the number of positions ahead
to move the cursor.
11-33
Skip Back “N” Characters Scan one of these bar codes to select the number of positions back to
move the cursor.
11-34
Send Preset Value Send Values 1 through 6 by scanning the appropriate bar code. Set
these values using the prefix/suffix values in
Table 8-4 on page 8-19 .
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
11-34
Table 11-2 Setup Field(s) Definitions (Continued)
Parameter Description Page
NOTE If there is no match and the rule fails, the next rule is checked.
Move Cursor To Character
Move Cursor To Start