General Radio Operations: Settings | |
|
|
7.After completing the time setting press under Done to complete the setting and to return to the previous menu.
Setting the Volume
The functions of the various selections are as follows:
Ringer: volume level for all data status alerts such as Alert Tones and incoming SMS Messages. Turning VibraCall on changes this level to 0.
Speaker: volume level for voice messages.
Keypad: volume level for keypad presses.
Alarm: volume level for the Alarm feature, which is overridden by VibraCall.
From the Settings menu, scroll to highlight Volume and press under Select. The Volume menu appears.
Volume
Ringer:6
Speaker:7
Keypad:1
Change Back
NOTE: Highlighting any of the volume choices and pressing the Volume Control keys automatically adjusts the volume levels.
NOTE: Pressing the Volume Control keys while not in the Volume menu only sets the Speaker Volume.
Setting the Ringer Volume
1.From the Volume menu, scroll to highlight Ringer and press under Change. The Ringer screen appears.
Ringer
3
OK Cancel
2.Use the Volume Control keys to adjust the Ringer volume as necessary and then press
under OK to save the selection and return to the previous menu.
February 10, 2005 |