30
English
GETTING STARTED
SELECTING A CONVENTIONAL ZONE AND CHANNEL
Up to 160 conventional channels, in one or more
conventional zones, can be programmed into
your radio.
To select a conventional zone and channel
Note: The selection of zones can be prorgrammed by
your dealer either on the Zone/Channel
Selector knob or via the menu keys.
–or–
SENDING A CONVENTIONAL CALL
Note: In the United States, FCC regulations require
you to monitor the conventional channels
before sending a call. The monitor feature
(see page 21) can be accessed through one
of your programmable buttons.
To send a conventional call
1Use the Zone/Channel Selector knob to
select the appropriate conventional zone.
2+ or ? until you see the desired
conventional channel on the display.
1) to enter menu mode.
2+ or ? until
3) to select
4+ or ? until you see the desired zone on
the display.
5) to select the desired zone.
Zone
Zone
6+ or ? until you see the desired
conventional channel on the display.
1Turn your radio on.
2Select the desired channel (see “Selecting a
Conventional Zone and Channel”).
3Hold the radio in a vertical
position at a distance of about
1 to 2 inches (2.5 to 5 cm)
from your mouth.
4Press the PTT button and speak clearly into
the microphone. The LED indicator lights
steady red while the call is being sent.
5Release the PTT button to listen.
04_GettingStarted.fm Page 30 Wednesday, June 19, 2002 2:13 PM