44
English
SCAN
To temporarily delete the channel /talkgroup:
Restoring a Channel/Talkgroup Back to the
Scan List
To restore a previously deleted talkgroup or
channel back to the Scan list, restart the scan
operation or turn your radio off and on again.
EDITING A SCAN LIST(SYSTEM SCAN OPERATION ONLY)One Scan list is assigned to each of the 16
positions on the Zone/Channel Selector knob.
Each Scan list can contain up to 16 talkgroups
and/or channels. The same talkgroup or
channel can be included in several Scan lists,
and the same Scan list can be assigned to
several Zone/Channel Selector positions.
When you edit a Scan list, you can either add,
delete, or prioritize talkgroups or channels.
Your radio cannot receive any calls while you
are editing a Scan list. The K symbol is
displayed while you are in edit mode.
Note: In Conventional operation only, even if there
is activity on a non-priority channel, your
radio automatically switches to an active pri-
ority channel and indicates the activity with
a short tone.
Adding or Deleting Talkgroups or Channels
in a Scan List
1 While the radio’s receiving activity is on the
nuisance channel, press and hold the prepro-
grammed Scan button until you hear a high-
pitched tone (valid key press).
2Release the Scan button. The nuisance chan-
nel has been temporarily deleted from your
Scan list.
1) to enter menu mode.
2+ or ? until
3) to select
4+ or ? until
Note: One Scan list per mode of operation
is available.
Program Lists
Program Lists
Scan List
07_Scan.fm Page 44 Thursday, September 5, 2002 5:02 PM