RADIO CALLS
DTMF
DTMF means Dual Tone Multi Frequency and is used when the radio is required to operate in a radio system with an interface to telephone systems.
There are two methods of accessing DTMF Live Dial Mode:
Automatic/Manual
To do this, your radio must send a telephone interconnect to a station that connects you to a phone line. After you have finished your call, the radio sends a clear down call (if programmed) to shutdown the connection to the phone line.
Sending the Telephone Interconnect Call
Your radio can be programmed to send the interconnect call in one of the following ways:
•automatically - when a call button
(Call 1 - 4 or PTT) has been programmed with the interconnect call, or a contact list entry has been programmed for DTMF access.
•manually - when you dial the code using the keypad
If in doubt, please contact your dealer or network manager for further information.
To initiate a DTMF call with Automatic Telephone Interconnect Call
1Press dedicated Call Button (Call
Display icon lit: | D |
2Wait for call to be set up when you will hear a dial tone.
Display shows: | Enter Digits |
3Enter desired phone number, taking care not to press the PTT.
Note: Each DTMF digit is transmitted instantly.
Display shows | 8116 |
entered digits: |
|
4Once the radio has connected to the called number, you can begin the conversation. Even though this is a phone call, your conversation mimics a radio call, that means that both parties speak in turn, i.e. press the PTT to talk, release to listen.
English 26
