21 English
GETTING STARTED
Note: After a short period of inactivity the radio
returns to the IDLE STATE.
Once in channel mode, there are two ways to
select a channel:
Method 1
Turn the rotary knob (1) clockwise or
counterclockwise until you reach the desired
channel indicated on the display.
Method 2
Sending a Call
1. Select the desired radio channel.
2. Press the PTT button and speak clearly
into the microphone.Your mouth should be
2.5 to 5 cm away from the microphone.
3. When transmitting, the red indicator will
light continuously.
4. Release the PTT button to listen.
Your radio may be configured for ‘Transmit
Inhibit’ under certain conditions (e.g. when the
channel is in use by others) in which case, the
channel busy tone will sound when you press the
PTT or call button to indicate that transmission is
inhibited.
When the channel is free, the Channel Free beep
will sound, and you can make a
call.
1+ or e until:
or
2c to confirm your selection.
Display shows:
(for 2 seconds)
Channel Number
Alias
Selected