Motorola GP366R manual Utilities Deleting a Nuisance Channel, Call Forward

UTILITIES

DELETING A NUISANCE CHANNEL

If a channel continually generates unwanted calls/ noise (a “nuisance” channel), you can temporarily remove it from the scan list by performing a Nuisance Channel Delete operation:

1.While the radio is on the Nuisance Channel, press and hold the Nuisance Delete button until you hear the scan start alert tone.

2.Release the Nuisance Delete button.

Note: You cannot perform a Nuisance Channel Delete on a priority channel or if there is only one remaining channel in the scan list.

ADDING A DELETED NUISANCE CHANNEL BACK INTO THE SCAN LIST USING THE SCAN BUTTON

1.Press the Scan button to stop scanning. The scan stop alert tone will sound.

2.Press the Scan button again to re-start scanning. The scan start alert tone will sound, and the scan list will contain all programmed channels.

Using the Menu

1.Follow the instructions for selecting Scan On/Off via the menu

2.Select Scan Off. Your radio will stop scanning, the scan stop alert tone will sound, the display icon Gand the LED indicator will be extinguished.

3.Select Scan On. Your radio will re-start scanning, the scan start alert tone will sound, the display icon Gwill be lit , the LED indicator will blink green and the scan list will contain all programmed channels.

CALL FORWARD

You can call forward calls to your radio to another radio if you are unable to take calls or are away from your radio.

You can switch On or Off Call Forward by using a preprogrammed Call Forward button or via the menu.

English 32