Maintenance
Lights
Turn off the lights and blower. Allow the lights to cool before handling. If new lights do not operate, be sure lights are inserted correctly before calling for service.
CAUTION:
Turn power off at breaker before removing a damaged bulb. Do not touch the bulbs immediately after use. The bulbs will remain hot for several minutes.
WARNING:
•Make sure the appliance and the lights are cool and power to the appliance has been turned off before replacing the light bulb(s). Failure to do so could result in electrical shock or burns.
•The lenses must be in place when using the appliance.
•The lenses serve to protect the light bulb from breaking.
•The lenses are made of glass. Handle carefully to avoid breaking. Broken glass can cause an injury.
Halogen Light Replacement
Bulb
Lens
Figure 5: Halogen Light Replacement
1.Using a flat edge from a screwdriver or equivalent tool, pry loose the lens cover, as shown in Figure 5.
2.Pull damaged bulb straight out from the socket to remove.
3.Replace with a new 120 V, 40W (maximum) bulb with
4.Reinstall the light and cover.
English 7