Motorola H270 manual Using your headset making & receiving calls, Test and use, Function Action

English

Test and use

Your phone and headset are now paired and ready to make and receive calls. To confirm they are successfully paired and operating properly, place the headset over your ear and make a call from your phone. You will hear ringing from the headset.

After you have successfully paired your phone and headset, you do not need to repeat these steps each time you use the headset.

Note: If desired, your headset can be restored to original factory settings. This action will erase all pairing information stored in your headset. Thus, you will need to pair your phone and headset again. To restore your headset to original factory settings, press and hold both Volume and Call buttons at the same time and slide Power switch to ON.

Using your headset: making & receiving calls

Your headset supports both Hands-free and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone’s user’s guide for more information.

Note: Some features are phone/network dependent.

Function	Action
Receive a call	Tap the call button
End a call	Tap the call button
Reject a call	Press and hold a volume button until the
	ringer stops
Make a voice dial call	Tap the call button and wait for voice
	prompt
Answer second incoming call	Use phone to answer (follow your phone’s
	instructions)

7