Motorola H62XAH6RR1AN Activating your Mike Account, Powering On, Battery Use and Maintenance

Models: H62XAH6RR1AN

1 102
Download 102 pages 7.34 Kb
Page 13
Image 13

2Remove the battery by pushing the battery toward the antenna and lifting it out.

Battery Use and Maintenance

The Motorola Approved Lithium Ion chargers provide optimum performance. Other chargers may not fully charge the Lithium Ion battery or may yield a reduced number of lifetime charge cycles.

Extreme temperatures degrade battery performance. Do not store the battery where temperatures exceed 60°C (140°F) or fall below -20°C (4°F ).

Lithium Ion batteries have a self discharge rate and without use, lose about 1% of their charge per day.

The battery capacity is degraded if the battery is stored for long periods while fully charged. If long term storage is required, store at half capacity.

Activating your Mike Account

Activating your Mike Account

Before you can begin using your i305 handset, you need to activate your Subscriber Identity Module (SIM) card on The Mike Network. Your SIM card holds the information required to enable your handset to connect to The Mike Network. It also stores your user information, language preference and contact list entries.

If you purchased your handset through an Authorized Mike Dealer, your SIM should already be active.

If you purchased your handset at another location, follow the “Getting Activated” instructions in the Mike Services User’s Guide.

Powering On

To power your handset on:

1Extend the antenna.

2Press p.

3If the Enter SIM PIN Code screen appears, enter your SIM PIN. See “Entering the PIN” on page 10. Press A under Ok.

Note: When you receive your handset, the SIM PIN is 0000. Change your PIN to prevent fraudulent use of the SIM card (see “Changing the PIN” on page 10).

5

Page 13
Image 13
Motorola H62XAH6RR1AN manual Activating your Mike Account, Powering On, Battery Use and Maintenance