33
Connecting your A/V Receiver, VCR and High Definition TV 1 Connect the com ponent video cable supplied with the HDT101 to the
Y, Pb, and Pr connectors on your TV and HDT101.
2 Connect a coaxial au dio cable to the S/PDIF OUT connector on the
HDT101 and the SPDIF input connector on the A/V receiver.
3 Connect a video cabl e to the VIDEO connector on the HDT101 and
the CABLE/TV VIDEO connector on the A/V receiver.
If your equipment supports it, S-Video connections may be used in
place of the standard composite video connections. In most c ases,
S-Video offers a higher level of standard definition v ideo quality than
composite video.
4 Connect a stereo audi o cable to the VCR AUDIO OUT R and L
connectors on the A/V receiver and the INPUT AUDIO R and L
connectors on the stereo VCR.
When using the digital audio output (S/PDIF OUT), the left / right
baseband audio connections to the A/V receiver are no t needed.
5 Connect a stereo audi o cable to the OUTPUT AUDIO OUT R and L
connectors on the stereo VCR and the VCR AUDIO IN R and L
connectors on the A/V receiver.
6 Connect a video cabl e to the INPUT VIDEO connector on the stereo
VCR and the VIDEO VCR OUT connector on the A/V receiver.
7 Connect a video cabl e to the OUTPUT VIDEO connector on the stereo
VCR and the VIDEO VCR IN connector on the A/V receiver.
8 Connect a video cabl e to the INPUT VIDEO connector on the stereo TV
and the TV/MONITOR OUTPUT VIDEO c onnector on the A/V receiver.
To switch between viewing input from your VCR and input from y our
HDT101, change your TV’s video inputs from the Component input to the
Video input.