38
TROUBLESHOOTING Before calling your service provider, review this tro ubleshooting section.
This information will help you quickly solve a probl em. If your problem
still exists, contact your service provider.
Problem Possible Solution
The POWER LED on
the front panel does
not light up
Confirm the power cord is plugged into a functioning
power outlet.
Press POWER on the front panel to see if the LED lights
up.
Determine if the HDT101 is in “standby” mode by
pressing STANDBY on the remote control.
No picture Verify that all cables are connected properly
(hand-tighten if necessary).
If you are watching TV using your VCR, be sure your
VCR is on.
Verify that the TV is directed to the proper input
source.
Poor picture
quality
Verify that all cables are connected properly
(hand-tighten if necessary).
Check the antenna and make sure it is aligned to the
correct direction.
Check the signal’s strength and quality. Press INFO to
display the i-Banner and review the color bars at the
bottom of the window. If any of the bars are red, adjust
your antenna and try again.
No sound Confirm that your HDT101’s and TV’s volume settings
are properly set and not in "mute" mode.
Verify that all cables are connected properly
(hand-tighten if necessary).
Scan the channel again. Press MENU to display the
on-screen menu and select Installation > Manual
Scan.