Motorola HS810 Controlling Headset Volume, Placing and Receiving Calls, Using Your Headset, Step

Using Your Headset

The headset will only automatically initiate a paired connection (via opening the boom) with the last device it was connected to. If you want to connect the headset to another device in the paired device list, you must initiate the connection from that device. Whichever of the eight devices initiates a connection to the headset afterwards, that device then becomes the “last connected” device.

Controlling Headset Volume

Increasing and Decreasing Volume

To increase speaker volume, press the top volume button repeatedly until you reach the desired volume level.

To decrease speaker volume, press the bottom volume button repeatedly until you reach the desired volume level.

Volume Orientation Technology

To change the volume button orientation for left or right ear:

Step

1With the headset’s boom closed, press and hold the Multifunction E button until the headset indicator turns on (about 3 seconds).

2Press the volume button that you want to use as the volume up. The headset indicator will flash several times to indicate success.

Repeat the above steps anytime to change the volume button orientation.

14

Using Your Headset

Placing and Receiving Calls

Your headset supports both Hands Free and Headset Profiles. Accessing call functions depends on which profile your phone supports.

Note: Some phones do not support all features listed. Please consult you phone user’s guide.

You can activate call functions for both Hands Free and Headset Profiles according to the following table:

	Device Status		Action
Function	Phone	Headset	Hands Free Profile	Headset Profile
Enter Pairing	On	Off	Press & hold E until LED remains lit.
(Configuration)		(boom	Release E, open boom.
Mode		closed)
Make a Voice	On in idle	On	Short press E,	Press E, speak
Dial Call			speak name, phone	name, phone dials call
			dials call
Dial a Number	On–user	On	N/A	Press E, call is sent
	dials number
Redial a	On–Voice	On–	Long press E	Press E, (recalls last
Number	dialing turned	(Idle)		phone number)
	on or off			Press E, (call is sent)
End a Call	On–in call	On	Short press E	Press E

15