Motorola HS810 manual Using Your Headset Indicators, Headset Indicator LED

Using Your Headset

	Device Status		Action
Function	Phone	Headset	Hands Free Profile	Headset Profile
Put Active	On–in call	On	Long press E	N/A
Call On Hold
Receive a	On–phone	On	Short press E (call	Press E (call is
Call	rings		is answered)	answered)
Reject a Call	On–phone	On	Long press E	N/A
	rings
Answer 2nd	On–in call,	On	Long press E,	N/A
incoming call	2nd call		places 1st call on
	coming in		hold, answers
			incoming call
Toggle	On–in call,	On	Long press E	N/A
between two	2nd call on
active calls	hold
Transfer call	On–in call	On	Short press E, (call	Press E (call
from phone to			transferred to	transferred to
Headset			headset)	headset)

Note: If the link is abnormally disconnected (e.g., out of range) the headset tries to reestablish the link.

16

Using Your Headset

Using Your Headset Indicators

Headset Indicator (LED)

With charger plugged in:

Headset Indicator	Headset
ON	charging in progress
OFF	charging complete
With no charger attached:
Headset Indicator	Headset
OFF	power off
ON (steady)	pairing mode
10 rapid flashes	pairing successful
flashes at a 3-second interval	standby (not on a call)
(.1 seconds ON 2.9 seconds OFF)
pulses at an 8-second interval	connected (on a call)
(2.0 seconds ON, 6.0 seconds OFF)

Note: When the wireless headset is paired to the phone and there is no activity for 5 minutes, the blue flashing LED turns off. Any button press on the headset will reawaken the headset and the flashing resumes. If you press the up and down volume buttons simultaneously during a call, the pulsing LED turns off for the duration of that call.

17