Note: You can also use a |
| unique ID. After your headset and phone | |
Motorola Original™ Vehicle Power |
| are paired, your headset automatically | |
Adapter to charge your headset while in | connects to your phone any time you | ||
your vehicle. |
| open the boom. | |
A fully charged headset battery provides | With your headset and phone in close | ||
approximately: |
| proximity: | |
• talk |
|
| |
| Step | ||
• standby time (boom |
|
| |
| 1 Put your headset into pairing mode. | ||
hours |
| a With the headset’s boom closed, | |
|
| ||
Pairing Your Headset |
|
| press and hold the Multifunction |
|
| Button E until the headset | |
and Phone |
|
| indicator turns on (about |
|
| 3 seconds). | |
Note: You must pair your headset and | The headset indicator turns on. | ||
phone before you can make a call. |
| b Release the button, then open the | |
“Pairing” creates a link between |
|
| headset boom. |
devices equipped with Bluetooth |
| The headset indicator remains on. | |
wireless technology and allows the |
|
|
|
|
|
| |
phone to remember your headset’s |
|
|
|
Using Your Headset | 15 | 16 | Using Your Headset |
Step | Pairing to Additional | |
| Devices | |
2 Perform a device discovery from | ||
the phone. | Your headset can store pairing | |
For details on device discovery | ||
information for up to eight different | ||
for your phone, refer to the | ||
devices that have Bluetooth wireless | ||
phone’s user’s guide. | ||
technology. Devices are stored in a | ||
When the scan is complete, the phone | ||
“Paired Device List” in memory in | ||
displays the devices found. | ||
chronological order. When an attempt to | ||
| ||
3 Select the Motorola HS850 from the | pair to more than eight devices is made, | |
discovered devices list and confirm | the oldest paired device is removed | |
following the on screen prompts. | from the list. | |
|
| |
4 When prompted by the phone, enter | Any of the eight paired devices can | |
the passkey 0000 and confirm to pair | initiate a paired connection to your | |
the headset with the phone. | ||
headset. | ||
The device ID is now stored in the | ||
Your headset will only automatically | ||
phone’s memory. | ||
initiate a paired connection (by opening | ||
Pairing is successful when the | ||
the boom) with the last device it was | ||
headset indicator flashes 10 times | ||
connected to. If you want to connect | ||
rapidly. | ||
your headset to another device in the | ||
| ||
|
Using Your Headset | 17 |
18Using Your Headset