
GPS Enabled
Note: Because your phone is continuously determining your location, using the GPS feature of your phone with map software uses the phone’s battery power quickly.
Software Compatibility
Your phone sends location information to your laptop or other device using the standard National Marine Electronics Association (NMEA) format. Your phone supports output messages in
The map software running on your laptop or other device must support NMEA 3.0.
Getting Started
To connect your phone to your laptop or other device:
1Open the connector cover.
connector cover
2With the phone’s display facing up, insert the data cable’s connector into the accessory connector, until you hear a click.
3Insert the data plug into the COM port of your laptop or other device.
Make sure no other application is using the COM port selected.
Make sure the COM port settings of your laptop or other device are set to the following:
•Bits per second: 4800
•Data bits: 8
•Parity: None
74