Motorola i836 manual Creating Entries, Contacts

Contacts

2Select Filter.

3Set this option to Show DC.

To set Contacts to show all entries:

1From the Contacts list, press m.

2Select Filter.

3Set this option to Show All.

Creating Entries

A number or address and a Contacts type are required for all Contacts entries. Other information is optional. You may enter the information in any order by scrolling through the entry details.

After you have entered the number or address, Contacts type, and any other information you want, you can press Aunder Done to save the entry to Contacts.

To cancel a Contacts entry at any time press, eto return to the idle screen.

To create a Contacts entry:

1To access the entry details screen: Select Contacts > [New Contact]. -or-

From the Contacts list, press m. Select New Contact.

2If you want to assign a name to the entry:

Select Name.

Enter the name. When you are finished, press O.

Tip: Press Aunder Browse to select a name already in Contacts.

3If you want to assign a ring tone to the name: Select Ringer.

Select the ring tone you want to assign.

4To assign a Contacts type to the number or address being stored:

Select the Contacts type field.

Select the Contacts type you want to assign.

Note: For information about creating Groups, see “Creating Groups in Contacts” on page 24.

5To store a number or address:

Select the # field (or ID for an email address, or IP for an IP address).

Enter the number or address. For phone numbers, use the 10-digit format. For email addresses, see “Entering Text” on page 43.

Tip: Press Aunder Browse to select a number or address from Contacts, the recent calls list, or Memo.

48