3VOLUME DOWN
a)During a call: Press to decrease the earpiece volume.
b)During ringing: Press to decrease the ringer volume.
NOTE
If the wireless headset is not registered, press and hold VOL+/ FLASH together with VOL- to initiate the registration mode.
Wireless Headset LED Indicators
Purple:
Steadily on: The wireless headset is unregistered.
Flashing: The wireless headset is registered but the base is not available (searching or out of range).
Blue:
Steadily on: When the headset is seated in the base and fully charged. Once the headset is successfully registered, the blue light will flash on then off, for about three seconds at a time, and emit a long beep.
Long flashing: The wireless headset is in idle mode and off the base.
Double flashing: The wireless headset is on, and if the signal becomes weak, three short beeps will be heard.
Continuously flashing: The wireless headset is ringing and can be heard through the earpiece.
Red:
Steadily on: When the wireless headset is charging on the base.
Long flashing: Indicates that the battery is low, the unit is not on the base, and the headset will emit short double beeps.
Double flashing: Indicates that the battery is low while the headset is in use and short double beeps will be emitted.
Triple flashing: Indicates powering on/off the headset and three short beeps will be emitted through the earpiece.
Red/Blue:
Toggling display: The wireless headset is in registration mode. When the headset is registered successfully, the headset will beep for around 2 seconds.
14 | Getting to know your phone |
|
|
