3.21.8Deleting all old messages through the base:
1.In idle mode, press and hold X to delete all the reviewed
messages.
through the handset:
1.Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWER MACHINE.
2.Press MENU and then VOL+ or REDIAL/VOL- to select
DEL ALL OLD MSG.
3.Press MENU to confirm.
NOTE
When the answering machine is full, 
will flash if there are new messages. ERASE SOME ANSWERER MSG will toggle within 2 seconds with MEMORY FULL. At this point, delete some messages to free up memory.
3.21.9 Remote access
Remote access allows you to operate your answering machine and listen to your messages by calling your phone from another phone.
Turn the remote access on/off
1.Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWER MACHINE.
2.Press MENU and then VOL+ or REDIAL/VOL- to select
REMOTE ACCESS.
3.Press MENU and then VOL+ or REDIAL/VOL- to select
ON or OFF.
4.Press MENU to confirm.
To enter the remote access mode, dial your phone number from another phone, when you hear the announcement, press TONE/* on your another phone and then enter the 4- digit remote security code (the default code is 0000).
The correct sequence of the 4 security PIN digits needs to be detected before entering remote access mode. Random digits detected prior to the correct 4 digits sequence are ignored, and the answering machine recording continues until the complete PIN is detected. There is no system prompt to enter the remote access code.
Using the Phone | 31 |
|
|
