3. Using the phone

3.1Calls

3.1.1Make a call

1.Press <or J.

2.Dial the phone number.

3.1.2Predial

1.Enter the phone number (maximum 32 digits). If you make a mistake, press Mto delete a digit.

2.Press <or Jto dial the phone number entered.

3.1.3 Dial one touch numbers 1 to 9

1. Press and hold a key from 1to 9until the number is displayed and dialed.

NOTE

You need to set the one touch number first.

- If no number is stored, you hear a double beep.

3.1.4Storing a number in memory

1. Dial the number to be stored at idle state.

2. Press and hold specific memory location buttons A/

B/C.

Using the phone

3. Press the Pbutton.

OR

1. In idle, press and hold A/B/C, enter the number. If there is number already existed, the number will be displayed and you can edit it if necessary.

2. Press Pto save.

A confirmation tone will be emitted when the number saved successfully.

3.1.5 Dialing a number from memory

In idle, press A/B/Cto dial the number pre-stored into the keys respectively.

OR

When you get a dial tone by pressing <or J, press the A/B/Cto dial the priority number.

You need to set the direct access number first.

-If no number is stored, you hear a beep and display shows List Empty.

3.1.6Call from the phonebook

1.Press .. The first entry in the phonebook is displayed.

2.Scroll ,to the entry you want.

15

Page 15
Image 15
Motorola MOTO-K301 manual Using the phone, Calls