Poor audio quality
The base is too close to electrical appliances, reinforced concrete walls or metal doorframes - move the base away from any electrical appliances.
No ring tone
•The ring tone is deactivated.
•Increase the volume.
Caller ID service does not work
Check your subscription with your network operator.
Phonebook
A phonebook entry cannot be stored
The phonebook is full. Delete an entry to free memory.
Display
No display
•Try recharging or replacing the battery pack.
•Reset the telephone base. Unplug the unit's electrical power, then plug it back in.
•If LED is not lit up, then try to unplug the unit's electrical power, then plug it back in.
Registration
When the handset lost its link with the base during a call
•Check the power cord is connected properly into the base.
•Check the power adapter is connected properly into an electrical outlet.
•Move the handset closer to the base. It may be out of range.
•Reset the base by unplugging the unit's electrical power. Wait for around 15 seconds and plug it back in again. Allow up to one minute for the handset and the base to synchronize.
Interference
Noise interference on your radio or television
Your base or charger may be too close. Move it as far away as possible.
Help | 29 |
|
|
