7. Advanced Settings
7.1Set the Dial Mode
The default dialing mode is suitable for your country and network operator. It is unlikely that you should need to change this setting unless advised to do so.
1.Press Pand ,to select SETUP BS.
2.Press Pto select DIAL MODE.
3.Press Pand ,to select TONE or PULSE.
4.Press Pto save.
NOTE
If pulse mode is selected, press *to switch from pulse to tone dialing temporarily when dialing out. After the call is ended, the dial mode will change back to pulse.
7.2Set the Flash Time
The default flash time is 600MS. It is unlikely that you should need to change this setting unless advised to do so.
1.Press Pand ,to select SETUP BS.
2.Press Pand ,to select FLASH TIME.
3.Press Pand ,to the flash time you want. (8 options are available: 90, 100, 110, 250, 300, 400, 600 and
700MS)
4.Press Pto save.
7.3Set the Area Code
1.Press Pand ,to select SETUP BS.
2.Press Pand ,to select AREA CODE.
3.Press Pand enter the area code.
4.Press Pto save.
7.4Reset All Settings
All personalized settings will be reset to default. Phonebook entries, calls list, redial list and numbers stored in the memory will remain unchanged.
1.Press Pand ,to select RESET SETTINGS.
2.Press Pand ,to select ALL SETTINGS.
3.Press Pto select YES.
4.Press Pto reset all settings to default.
Advanced Settings | 27 |
|
|
