Lightning Arrestors

The applicable electrical code(s) may require that lightning arrestors capable of supporting L- band transmissions be installed on all cabling between the fixed-site antenna and the structure which the equipment is housed in. It is also suggested that any structure containing the radio be equipped with a lightning rod connected to the ground. The professional doing the fixed- site installation is responsible for determining all such requirements with the customer and installing the equipment such that it complies with all applicable standards.

Installing the TU – Fixed-site and Vehicle

Installation – General

1)For ease of service, route the radio cables and power cables together.

2)Always disconnect the negative side of the vehicle battery prior to any electrical work.

3)Whenever routing cable through holes drilled in metal or through bulkheads, use grommets and RTV sealant to weatherproof all holes drilled on the outside of the vehicle.

4)Use cable ties every 30 – 45 cm (12-18”).

5)The TU can be mounted in either the horizontal or vertical position.

6)The main power line should be connected directly to the vehicle battery (or 12 VDC power supply). If you must connect it to another circuit, ensure sufficient amperage is available. In the case of a fixed-site installation, tie the Battery and Ignition Sense wires together on the 12 VDC power source.

7)The ground line should be connected directly to the vehicle’s battery ground.

8)Install the TU in a protected but ventilated area (inside building or vehicle). Allow at least a one (1) inch space around all surfaces, except for the surface attached to the mounting bracket to provide adequate cooling. Ensure that the location is accessible for servicing.

9)The TU is not waterproof.

10)Always provision the wiring into the TU with a drip loop.

11)With the exception of the TU to Antenna cable, do not route the cables outside the vehicle.

Mounting Bracket Information

NOTE: Use care when drilling through the body of the vehicle to avoid puncturing critical items.

The bracket is connected to the TU with two (2) provided screws. There is a 5mm gap between the TU and the bracket.

MSAT-G2 Installation Guide

11

Page 12 Page 14
Page 13
Image 13
Motorola MSAT-G2 manual Installing the TU Fixed-site and Vehicle, Lightning Arrestors, Installation General
Page 12 Page 14

MSAT-G2 specifications

The Motorola MSAT-G2 is a cutting-edge satellite communication terminal that has gained significant attention for its advanced features and robust performance. Designed for users who require reliable communication solutions in remote areas, the MSAT-G2 combines state-of-the-art technology with user-friendly functionality.

One of the standout features of the MSAT-G2 is its versatility. The terminal supports both voice and data communications, making it an ideal choice for various applications such as emergency response, disaster recovery, and field operations in industries like oil and gas, mining, and construction. With its ability to connect to multiple satellite networks, including L-band and broadband, users can rely on the MSAT-G2 to maintain connectivity even in the most challenging environments.

The MSAT-G2 is equipped with advanced satellite modem technology that enables it to achieve high data rates, ensuring speedy communication. With a built-in GPS receiver, the device also allows for precise location tracking, which is crucial for many operational scenarios. The terminal’s intuitive interface simplifies the user experience, allowing for quick setup and easy operation, so that users can focus on their tasks rather than on complicated technical procedures.

Durability is another key characteristic of the MSAT-G2. Built to withstand harsh conditions, it features rugged housing that meets environmental standards for temperature, humidity, and shock resistance. This ensures that the terminal remains functional in extreme situations, making it a reliable companion for fieldwork.

Moreover, the MSAT-G2 offers comprehensive security features, including encryption options that protect sensitive communications from unauthorized access. This level of security is particularly important for organizations that handle confidential information, such as government agencies and private enterprises.

The accompanying software for the MSAT-G2 allows users to manage their communications effectively, enabling features such as remote monitoring and diagnostics. With this capability, organizations can ensure optimal operation and address any issues promptly.

In summary, the Motorola MSAT-G2 represents a remarkable advancement in satellite communication technology. Its combination of versatility, speed, durability, and security makes it an essential tool for professionals operating in remote locations. Whether for routine communication or critical emergency response, the MSAT-G2 stands out as a reliable and effective solution that meets the ever-evolving demands of the modern world.
Top Page Image Contents