Motorola RC-U63CDR manual Code Number Read-Back, Programming the ALL SmartKey, Ssi

~8214842.doc

Luxman	281
Magnavox	080
Marantz	282	283	284	285
NAD	286
Onkyo	126	171	304
Optimus	142	229	321
Panasonic	032	074	438	441
Parasound	323
Philips (Magnavox)	080
Pioneer	123	137	251	298
Quasar	032
Radio Shack	229	267
RCA	439
Realistic	226	268
Rotel	310
Sansui	283
Sanyo	195
Scott	272
Sharp	294
Sherwood	229	267
Sony	041	057	232	287 442
Soundesign	083	088	239	265
SSI	313
Taekwang	142
Teac	314	316
Technics	032
Wards	063
Victor	114	241
Yamaha	145	254	303
Zenith	036	083	088	239 265

8.Code Number Read-Back

To identify the 3-digit TV setup code stored under the Point and Press® programming method, follow these steps:

1.Press [TV], then [OK] together until the [TV] button illuminates.

2.Press [INFO]. The power / mode buttons will “blink back” the code numbers, with a 1-second interval between each digit of the code. Please note that for the numeric “0”, the mode buttons will illuminate blink in fast-sequence.

Example: For code “130”, the power / mode buttons will blink 1-time, then 3-times, then in a fast-sequence for the 0.

To identify the 3-digit VCR code, press [VCR], then [OK] in step 1, then press [INFO].

To identify the 3-digit DVD code, press [DVD], then [OK] in step 1, then press [INFO].

To identify the 3-digit AUDIO code, press [AUDIO], then [OK] in step 1, then press [INFO].

9. ALL SmartKey®

Once you have programmed the remote to operate your electronic devices, you can press the [ALL] SmartKey® to turn your Cable set-top terminal and TV on / off with one button press. You can also program the [ALL] button to turn on / off additional electronic devices and / or tune your TV to its correct output channel.

Programming the [ALL] SmartKey®

1.Press [ALL], then [MENU] together until the [CBL] button illuminates.

2.Enter one of the following options on the keypad of the remote:

-11 -