~8214842.doc
2.From the Cable Setup Code list, locate the
3.Then, press [OK] to lock in the code. The power / mode buttons will blink
v Cable Setup Codes
Motorola |
|
DCT | 002 |
CFT 2200 | 002 |
DCT DVR terminals | 002 |
Scientific Atlanta |
|
Explorer® 8000 (SARA - | 412 |
Explorer® 8000 (Passport - | 413 |
Explorer® | 412 |
8600X | 005 |
8600 | 005 |
Pace |
|
510 Digital | 412 |
HD Digital | 412 |
Pioneer |
|
Voyager® | 413 |
007 | |
Tocom |
|
5503VIP, 5507, 5508 | 008 |
Zenith |
|
MM 2500 | 009 |
Digital | 013 |
5. Programming Your TV, VCR, DVD, and AUDIO Devices
Code-Entry Programming
1.Turn on all the electronic devices (TV, VCR, DVD, AUDIO) you want to program the remote to operate.
2.Press [OK], then [MUTE] together until the power / mode buttons illuminate in
3.a. To program your TV, locate the
b. As soon as you have entered a
1.If the TV turns back on, press [OK] to lock in the code. The power / mode buttons will blink 3- times and go out.
Or
2.If the TV does not turn back on, enter a different
4.To program your VCR, refer to the VCR / DVD Setup Code lists and repeat steps 2 and 3 above.
5.To program your DVD, refer to the VCR / DVD Setup Code lists and repeat steps 2 and 3 above.
6.To program your AUDIO equipment, refer to the AUDIO Setup Code list and repeat steps 2 and 3 above.
-3 -