Motorola RDV2020, RDV5100, RDU2020, RDU4100 manual MUC LED Indicator

RADIO OVERVIEW

Charging a Radio and Battery using a Multi Unit Charger- MUC (Optional Accessory)

The Multi Unit Charger (MUC) allows drop-in charging of up to 6 radios or batteries. Batteries can be charged with the radios or removed and placed in the MUC separately. Each of the 6 charging pockets can hold a radio or battery, but not both.

1.Place the charger on a flat surface.

2.Insert the power cord plug into the MUC’s jack.

3.Plug the cord into an AC outlet.

4.Turn the radio OFF.

5.Set removable bracket for battery type.

6.Insert the radio or battery into the charging pocket.

Notes:

•This Multi Unit Charger also allows you to clone up to 3 radios (3 Source radios and 3 Target radios). Refer to page 51 for details.

•Further details on MUC’s operation are explained in the Instructions Sheet provided with the MUC. For part number details, refer to the Accessories section.

MUC LED Indicator

Status		LED Status	Comments
Charging		Steady Red	The charger is
		Indication	currently charging
Charge		Steady Green	Battery is fully
Complete		Indication	charged
Battery		Blinking red	Battery was faulty
Fault (*)		(fast)	when inserted
Note:	(*) Normally re-seating the battery pack
	will correct this issue.

English 28