Motorola RMM2050 manual Reading Ctcss / DPL Values, Reading Auto-Scan Values, Active Channels

PROGRAMMING FEATURES

Reading CTCSS / DPL Values

Cycle through the features available for configuration by short pressing the PTT button until you hear the current code. The radio moves to the programming CTCSS/PL codes mode.

Enter a new code value using the SB1 and SB2 buttons.

The RM Series radios have up to 219 codes available. For more information, refer to “Frequency and Code Charts” on page 53.

Reading Auto-Scan Values

After hearing the CTCSS/DPL codes, short pressing the PTT button moves you to Auto- Scan mode.

Auto-Scan has only two values:

•Enabled

•Disabled

Active Channels

While in Auto-Scan mode, short pressing the PTT button shifts the radio to ‘Active Channels’ feature. Modify the amount of channels available using the SB1 and SB2 buttons.

Saving Settings

Once you are satisfied with the settings, you can either:

•short press the PTT button to continue programming,

•long press the PTT button to save and return to ‘Idle’ Programming Mode, or

•long press the PTT button twice to exit ‘Idle’ Programming Mode and return to the normal radio operation.

Note:

•To exit the programming mode without saving, turn OFF the radio.

•If you ‘roll-over’ to the beginning of ‘Idle’ Programming Mode, you will hear “Channel Number” . All changed values will be automatically saved.

English 34