Cloning with a Multi Unit Charger (MUC)
Pocket 1 | Pocket 4 |
“CLONE” symbol Pocket 2 “CLONE” symbol Pocket 5
To clone radios using the MUC, there must be at least two radios:
•a Source radio (radio which profiles will be cloned or copied from) and
•a Target radio (the radio which profile will be cloned from the source radio.)
The Source radio has to be in Pocket 1 or 4 while the Target radio has to be in Pocket 2 or 5, matching in the MUCs pockets by pairs as follows:
•1 and 2 or,
•4 and 5.
When cloning, the MUC does not need to be plugged into a power source, but ALL radios require charged batteries.
1.Turn ON the Target radio and place it into one of the MUC Target Pockets
2.Power the Source radio following the sequence below:
•Press the PTT button and SB2 simultaneously while turning the radio ON.
•Wait for 3 seconds before releasing the buttons until the audible tone “Cloning” is heard.
3.Place the Source radio in the source pocket that pairs with the target pocket you chose in step 1. Press and release the SB1 button.
4.After cloning is completed, the Source radio will announce either “successful” (cloning is successful) or “fail” (cloning has failed). If the Source radio is a display model, it will either
PROGRAMMING FEATURES
43English
