Motorola SB4200 5, 6

Home Print Exit

Introduction Before You Begin Installation Configuration Troubleshooting Legal

SB4100.

Setting Up a USB Driver in W indows 98

Note: If the window on the upper left of this page is not displayed with text stating that the

NET4100.INF file was found, then verify that the Motorola CD-ROM is in the drive and

accessible. If the corre ct driver file is still not listed, then cance l the installation and

remove invalid entries as described in Example 1 and/or Example 2 found under the

heading called “Recovery After Installation Errors with Win98_SE and Windows 98”

starting on page 48 of this user guide.

5After the window on the left is displayed, click Next.

Note: In some installations, a window with the message

may display

and prompt you to specify your CD-ROM drive. If this window displays, enter your

CD-ROM drive letter (for example, “D:”) and then click OK.

6At this point, Windows 98 may need additional system files loaded to complete the

installation. These files are located on your Windows 98 CD-ROM.Be sure your

Windows 98 CD-ROM is in the CD-ROM Drive and click OK to install System Files.