50
X
Home Print Exit
Introduction Before You Begin Installation Configuration Troubleshooting Legal
Recovery After Installation Errors with
Win98_SE and W indows 98
Example 2The SB4200 drivers may have loaded, but no protocol was bound to the adapter. To see
if this is the case:
1Remove the USB cable from the SB4200.
2From the Windows Desktop, right-click the Network Neighborhood icon to display
a list of options.
3Highlight and then click Properties at the bottom of the list. The Network window is
displayed.
4Click the Configuration tab, highlight the Motorola Surfboard USB Cable Modem
SB4100 entry, and then click Properties.
5Click the Bindings tab. If TCP/IP is not listed, either add the protocol to the adapter
or remove the entry for Motorola Surfboard USB Cable Modem SB4100.
To remove the entry: In the Network window, highlight Motorola Surfboard USB Cable
Modem SB4100 and then press Remove.