![](/images/new-backgrounds/1147135/14713541x1.webp)
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
Installation
The following subsections provide information about installing the SBG900 hardware:
•
•
•
•
•
•
•
•
Before You Begin
Precautions
Signing Up for Service
Computer System Requirements
Connecting the SBG900 to the Cable System
Cabling the LAN
Obtaining an IP Address for Ethernet
Connecting a PC to the USB Port
For information about wireless LAN setup, see “Setting Up the Wireless LAN”.
Before You Begin
Before you begin the installation, check that you received the following items with your SBG900:
Item | Description |
Power adapter | Connects the SBG 900 to the external AC power supply |
cord |
|
Connects to the Ethernet port | |
Ethernet cable |
|
USB cable | Connects to the USB port |
Motorola SURFboard | Contains this User Guide and USB drivers |
Wireless Cable Modem |
|
Gateway |
|
You will need
Determine the connection types you will make to the SBG900. Check that you have the required cables, adapters, and adapter software. You may need:
Wireless LAN | Wireless adapter and driver software for each computer having a wireless connection (see |
| “Optional Accessories”) |
Wired Ethernet LAN Ethernet cables and network interface cards (NICs) with accompanying installation software To connect more than one computer to the SBG900, one or more Ethernet hubs or switches
USB | A USB cable and the Motorola SURFboard Wireless Cable Modem Gateway |
| containing the software for USB installation |
Coaxial cable, RF splitters, hubs, and switches are available at consumer electronic stores.
X | 15 | SBG900 User Guide |