![](/images/new-backgrounds/1147135/14713593x1.webp)
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway
TCP/IP Wireless USB
Gateway > LAN — nat config Page
Use this page to enable NAT and add clients to the CURRENT NAT PASSTHROUGH list:
Gateway > LAN — nat config page fields
Field or Button | Description |
LAN |
|
Enable NAT | If enabled, the single HFC IP Address (public IP address) assigned by the cable service |
| provider is mapped to many private IP addresses on the SBG900 LAN. |
Apply | Click to apply your changes. You must reboot the SBG900. |
NEW NAT | Specifies up to 32 computers as passthrough clients not subject to NAT, using their MAC |
PASSTHROUGH | addresses. |
MAC Address | Type the passthrough client MAC address. The format is 16 hexadecimal numerals. |
Bypass Firewall | Check this box to set the NAT passthrough computer as a DMZ client. Use this setting with |
(True DMZ) | extreme caution because a DMZ client is completely open to Internet hackers. |
Add | Click to add the MAC address to the CURRENT NAT PASSTHROUGH list. |
CURRENT NAT | Lists the computers on the LAN that are configured for NAT passthrough. |
PASSTHROUGH |
|
Delete | Click to delete the selected MAC address from the NAT passthrough list. |
X | 41 | SBG900 User Guide |