2

IP2250 Management Ports

The Ethernet management ports on IP2250 systems are designed to be used for the following purposes:

„Managing the appliance

„Firewall synchronization traffic

„IP cluster protocol traffic

„Connection to a log server

Caution

The management ports are not suitable for forwarding production data traffic. Do not use them for this purpose.

Configuring Network Devices

Network Voyager displays network devices as physical interfaces. A physical interface exists for each physical port on a network interface card (NIC) installed in the appliance. Physical interface names have the form:

<type>-s<slot>p<port>

where:

<type> is a prefix indicating the device type.

<slot> is the number of the slot the device occupies in the appliance.

<port> is the port number of the NIC. The first port on a NIC is port one. For example, a two-port Ethernet NIC in slot 2 is represented by two physical interfaces: eth-s2p1 and eth-s2p2.

The following table lists the interface-name prefixes for each type.

Type Prefix

Ethernet eth

FDDI fddi

ATM atm

Serial ser

T1/E1 ser

HSSI ser

Token Ring tok

30

Nokia Network Voyager for IPSO 4.0 Reference Guide

Page 30
Image 30
Nokia IPSO 4.0 manual IP2250 Management Ports, Configuring Network Devices, Type Prefix