8.(Optional) From the
9.(Optional) Click Up.
10.In the Policies table, enter rule_1 as the name for a new policy in the New Policy text box. Click Apply.
11.In the policies table, click on rule_1.
The corresponding Configuring Policy page appears to complete the missing parameters of the policy.
12.Select
13.If no default is selected, select
14.Enter a text string, such as secret, in the Enter Shared Secret text box and Shared Secret (Verify) text box. Click Apply.
15.Click Up to return to the IPSec General Configuration page.
Under the IPSec Tunnel Rules table, enter IPSec_tunn in the New Tunnel field.
16.If Create a logical interface appears, select Yes.
17.Enter 192.68.26.65 in the Local Address text box.
18.Enter 192.68.26.74 in the Remote Address text box. Click Apply.
19.Click on the name in Tunnel Rules table. The IPSec Tunnel IPSec_tunn page appears.
20.(Optional) Click On to activate Hello Protocol.
Click Apply. The Hello Interval and Dead Interval text boxes appear.
21.(Optional) Enter 60 as a value in the Hello Interval text box and enter 180 as a value for the Dead Interval text box.
Click Apply.
22.From the
A new table, Linked Policy, appears.
23.Select SITE_A from the Source Filters
24.Select site_B from the Destination Filters
25.Click Apply.
26.Click Save to make your changes permanent.
Nokia Network Voyager for IPSO 4.0 Reference Guide | 345 |
