Nokia IPSO 4.0 Interpreting Error Messages, Configuring Location and Contact Information, 260

6

4.Click Save to make your changes permanent.

Configuring Location and Contact Information

The settings for location and contact information provide information to the management system about where your device is located and who to contact about it.

Set the location and contact strings when you perform the initial configuration for SNMP on your system.

To configure location and contact information

1.Choose SNMP under Configuration in the tree view.

2.In the SNMP Location String text field, enter the actual location of the device. Click Apply.

3.In the SNMP Contact String text field, enter the name of department or person who has administrative responsibility for the device.

4.Click Apply.

5.Click Save to make your changes permanent.

Interpreting Error Messages

This section lists and explains certain common error status values that can appear in SNMP messages. Within the PDU, the third field can include an error-status integer that refers to a specific problem. The integer zero (0) means that no errors were detected. When the error field is anything other than 0, the next field includes an error-index value that identifies the variable, or object, in the variable-bindings list that caused the error.

The following table lists the error status codes and their corresponding meanings.

Error status code	Meaning	Error status code	Meaning
0	noError	10	wrongValue
1	tooBig	11	noCreation
2	NoSuchName	12	inconsistentValue
3	BadValue	13	resourceUnavailable
4	ReadOnly	14	commitFailed
5	genError	15	undoFailed
6	noAccess	16	authorizationError
7	wrongType	17	notWritable
8	wrongLength	18	inconsistentName

260 Nokia Network Voyager for IPSO 4.0 Reference Guide