
configuration. You do not have to separately specify settings for each interface. For more information, see “Configuring
Full
Configuring
To implement
Note
Before you delete an IP address from a logical interface, you must delete the corresponding backup addresses configured in the
To add a virtual router
1.Log on to the platform you will use as the master.
2.If you have not done so already, assign IP addresses to the interfaces you will use for the virtual router.
3.Click VRRP under Configuration > High Availability in the tree view.
4.(Optional) If you want to allow the system to accept and respond to IP packets sent to an adopted VRRP IP address, select the Enabled radio button for Accept Connections to VRRP IPs.
The VRRP protocol specifies not to accept or respond to such IP packets. Overriding this specification is recommended if you are deploying applications whose service is tied to a VRRP IP address. You can also use it to allow logins to the master by using an adopted VRRP IP address. You must also enable this option if you configure a virtual IP for VRRP to run on OSFP, PIM, or OSPF.
5.In the Create a New
6.Click Apply.
7.Additional fields are displayed showing the configuration parameters. Enter values into these fields. For more information see “Selecting Configuration Parameters”.
Nokia Network Voyager for IPSO 4.0 Reference Guide | 193 |