3.Click Apply.

4.Under the Existing rules for NotRIP table, click the Add New Rule Before check box.

5.Click Apply.

6.Enter 520 in the Dest Port Range text box in the Existing rules for NotRIP table.

7.Select ignore from the Action drop-down window in the Existing rules for NotRIP table.

8.Select isdn-s2p1c1 from the Add Interfaces drop-down window.

9.Click Apply.

10.Click Save.

ISDN Network Configuration Example

The following figure shows the network configuration for the example described below.

eth-s1p1

206.226.5.1 ISDN phone isdn-s4p1

number 384020 206.226.15.1

ISDN Cloud

ISDN phone 206.226.15.2 number 38400 isdn-s2p1

eth-s3p1

192.168.24.65

206.226.5.2

206.226.5.3

192.168.24.66

192.168.24.67

00067

A Nokia IP330 Security Platform at a remote branch office connects to a Nokia IP650 Security Platform in a company’s main office through ISDN by using PPP.

Considering the nature of the traffic being transmitted and the charging rates on an ISDN network, the ISDN interface on the Nokia IP330 in this example has its minimum-call timer set to four minutes and its idle timer set to one minute. The Nokia IP330 is configured to send a username and password to the main office.

The Nokia IP650 is configured so that only incoming calls that originate from the Nokia IP330 is answered. The PPP connection is in this example, the default values for the ISDN interface are acceptable. Therefore, no configuration of the physical interface is required.

Nokia Network Voyager for IPSO 4.0 Reference Guide

61

Page 61
Image 61
Nokia IPSO 4.0 manual Isdn Network Configuration Example